A/C GRILLES
COMPANIONWAY SLATS
CONTACT US
CUSTOM CABINETS
DOORS-CABINET
DOORS-ENTRY
DOORS-OUTDOOR KITCHEN
DRAWER UNITS


HOME
ABOUT US
SITE MAP
DRINK HOLDERS
FLOOR GRATING
GALLEY ACCESSORIES
HAND RAILS
HATCH MOLDING
HEAD ACCESSORIES
HOOKS & HOLDERS


LOCAL RESOURCES
NAUTICAL TERMS
ON-LINE CATALOG
INTERIORS
SHOWER/STEAM BATH SEATS
SLIDING HATCH COVERS
STAIR TREADS
SWIM/DIVE PLATFORMS
TABLES
WINDOW MOLDING
PROJECT EXAMPLES


ONLINE POLICY
TEAK INFO
SHOPPING CART
 
   
 

Custom Designed
Swim / Dive Platforms

Order Directly From the Manufacturer
"Made in USA by American Craftsmen in St. Petersburg, Fl."

 

We design and fabricate new, replacement, or redesigned Swim / Dive Platforms.  Should you have a need for this item, we can accommodate your requirements.  We will work with you to assure that the Swim / Dive Platform will be appropriate for your application and conform to the contour of your boat as we have for other satisfied customers.

Please use the on-line contact form, send an email teakmarine@tampabay.rr.com, or give us a call (727) 510-3198 to set up an appointment to discuss your application and to obtain an estimate.

Oiled Finish

Below are several examples of our work for larger boats which are available only via special order. 

Shown below the larger custom order versions are three (3) styles that are available via our on-line store.

 
 

 

  • Custom designed to fit the contour of your boat.

  • Several basic designs are available from which you can select. 

  • Alternatively, you can assist in the design if you desire. 

  • View the following examples of our design/fabrication capabilities.

  • Standard thickness = 1-1/2"

  • Other thicknesses are available upon request.

  • Solid Teak

  • Oiled Finish

 
 

    

 

Examples of Custom Designed Swim Platforms for Large Yachts

 

Large Yacht Swim Platform Being Prepared for Overland Shipment


Custom Swim Platform Inserts For "ApreaMare" Italian Boat Design - Fits Inside a SS  Tubular Frame






Example of Custom Swim Platform For Medium Size Yacht - Style "B"




Example of Custom Swim Platform For Medium Sized  Power Boat
Style "B"


Example of Custom Swim Platform For Small  Power Boat
Style "B"




Example of Custom Swim Platform For Small "Shamrock" Power Boat w/Trim Tab Cutouts
(And Customer Add-Ons)
Modification of Style "B"

Example of Custom Swim Platform For 26' "Shamrock" Power Boat w/Trim Tab Cutouts
Modification of Style "B"



Example of Swim Platform For Small Power Boat - Style "A"


 
 
 

Also available are

Platforms for smaller I/O Powered Boats

Order Directly From the Manufacturer
"Made in USA by American Craftsmen in St. Petersburg, Fl."

The following Styles & Sizes are available via our on-line shopping cart.

Style "B" is furnished with the curve to fit your transom at no additional cost. 
You furnish the dimensions and we do the rest.

To determine the dimensions that define your boat's transom curve, follow the
"Platform Curve Layout Guide"
furnished in Adobe PDF Format

 
Two Styles to choose from.

Oiled Finish

Standard Sizes are:

Style "A" Style "B"



Style "A"
Part No S7801 - 72" W Back (63" Front) x 22" D x 1-1/2" Thick
Part No S7802 - 80" W Back (71" Front) x 22" D x 1-1/2" Thick
Part No S7803 - 90" W Back (80" Front) x 22" D x 1-1/2" Thick

Other sizes are available via custom order.
Please use the on-line contact form,
send an email teakmarine@tampabay.rr.com,
or give us a call
(727) 510-3198 to set up an appointment to discuss your application and to obtain an estimate.


Style "B"
Part No S7804 - 72" W Back (63" Front) x 22" D x 1-1/2" Thick
Part No S7805 - 80" W Back (71" Front) x 22" D x 1-1/2" Thick
Part No S7806 - 90" W Back (80" Front) x 22" D x 1-1/2" Thick

Other sizes are available via custom order.
Please use the on-line contact form,
send an email teakmarine@tampabay.rr.com,
or give us a call
(727) 510-3198 to set up an appointment to discuss your application and to obtain an estimate.

 

           



     Platforms for smaller Outboard Powered Boats

Order Directly From the Manufacturer
"Made in USA by American Craftsmen in St. Petersburg, Fl."



Oiled Finish

 
 

Standard Sizes are:

Part No S7901 - 18" W x 16" D x 1" Thick
Part No S7902 - 24" W x 18" D x 1" Thick
Part No S7903 -
36" W x 20" D x 1" Thick

Other sizes are available via custom order.

Please use the on-line contact form,
send an email teakmarine@tampabay.rr.com,
or give us a call
(727) 510-3198 to set up an appointment
to discuss your application and to obtain an estimate.

   
 
A/C GRILLES
COMPANIONWAY SLATS
CONTACT US
CUSTOM CABINETS
DOORS-CABINET
DOORS-ENTRY
DOORS-OUTDOOR KITCHEN
DRAWER UNITS


HOME
ABOUT US
SITE MAP
DRINK HOLDERS
FLOOR GRATING
GALLEY ACCESSORIES
HAND RAILS
HATCH MOLDING
HEAD ACCESSORIES
HOOKS & HOLDERS


LOCAL RESOURCES
NAUTICAL TERMS
ON-LINE CATALOG
INTERIORS
SHOWER/STEAM BATH SEATS
SLIDING HATCH COVERS
STAIR TREADS
SWIM/DIVE PLATFORMS
TABLES
WINDOW MOLDING
PROJECT EXAMPLES


ONLINE POLICY
TEAK INFO
SHOPPING CART
 

 

 


Visit our On-Line Shopping Cart

  
 

Online Payments


 

Website designed and maintained by
S & P Custom, Inc.


S & P Custom, Inc.
171 40th Ave. S.E.
St. Petersburg, Fl. 3370
5

Telephone:  (727) 510-3198
Email:  teakmarine@tampabay.rr.com

To report errors or make recommendations on this website
please contact:
 webmaster@teakmarinewoodwork.com